Parade Seat

[Allen Goodman]

Any one have a good phone number for Larry Lane who builds parade seats? Number I have is no longer in service. Maybe he's not building them any longer, so if anyone know who or where I can get a seat for a late JD B would appreciate it.

 

[BillinCentralMO]

Internet shows 309 244 8407. Is that number you tried ? I think mine came from Steiner 25 years ago. I really like mine. Only safe way to get a passenger on a 36 A with no fenders.

 

[Dan in Ohio]

Buddy seat like original.

GM for sale adds. Says it will fit a bat box so it might fit your late B.

 

[Crookedwrench]

Got an original seat frame and mounted it to the rear and to the right of the drivers seat. Rider can see down the road. Has seen many Tractor Rides. Rear seat has the same foot room as driver without the brake pedals behind your heels!

 

[Rich'sToys]

I'd be interested in seeing how you mounted that.

 

[Allen Goodman]

Could you post some photos of how you mounted the seat? Very interested in that setup. Thanks

 

[Crookedwrench]

You will need to have fenders to make this plan work. Hope to upload some photos of the initial fabrication. Have since added a bumper to meet the specs of the The Big Bridge Crossing. 2 angle iron off of the right axle, 1 tubular steel off of both sides of the aftermarket 3pth. Flat bar pin in the top of the 3pth, And tubular steel down to the drawbar. It is not easy to take it off and on, but I do it every season. Rider is too close to wheels if the are not set wide WITH fenders. 270 993 one one nine one
Don
Junk photos came with the good ones. Sorry

 

[Allen Goodman]

Your photo's didn't load. Try again. Thanks

 

[Crookedwrench]

Photos?

 

[Allen Goodman]

Interesting, I may have to look into doing the same. Thanks for the photo's.