Parts shortage

Gary Mitchell

Well-known Member
I haven't needed any parts for a long time so I have no recent experience with this, but, a guy I know told me that alternators, starters, auto and tractor parts in general are getting hard to come by due to shortages. This dude is prone to buying into every conspiracy theory floats by so I take everything he says with a grain of salt. Anything to this? Thanks,,, gm
 
For the past 18 months we have used up the products that were in warehouses across the country.

Manufacturing has been shut down or much lower production than normal around the globe.

Now we have a shipping problem, from global container ships to cross country semis to local route drivers.

We are not able to resupply the warehouses and make up the lost production we have had in the past 18 months.

It appears the health issue around the globe continues to be a problem despite the best efforts to contain it, it continues to flair up and slow down production and work around the globe.

I think we are in some big troubles on this issue.

Consumers wont notice or complain until the shelves are bare, which will be another 6 months or so when their store shelves become really empty of things we never thought would run short.

Those of us in production have seen this issue since last spring.

I dont think we need to yell the sky is falling. But I do think we have some serious issues now and on the horizon, and it would have been good for our government to see, understand, and help prepare for whats coming. I dont think a govt can solve the issue it is a global one. But they could make it 10% better or 10% worse, and Im disappointed at this time....

Anyhow, yes there is a problem. Try to find tractor and combine parts, try to find gps globes, try to find hydraulic fittings, try to find things with computer chips or plastic parts in them.

It is becoming a real and serious issue.

Paul
 


Yes, I have personally seen "shortages" as in 2-3 month delays for things that were available in a few days.
 
Shortages are real, as to why that is subject to lots of speculation. I don't know one business of any kind that won't hire an abke bodied person, all are running short. I am supposed to be retired. Did my 1099 bookkeeping for October and I worked every day save Sunday mornings. Working at a saw mill as I type this that hasn't had a full tine loader man for two months.
 
I am involved in the manufacture of electronic control systems for potato planters, fertiliser applicators, sprayers and parsnip and onion harvesters.

Even simple parts that I would order one day and get delivered the next, are hard to come by. Things like diodes are either not available or on twelve to twenty four month delivery. I had a simple rubber cable sleeve seal on order with a promised delivery date of 20th September 2021, when that date arrived I got a message, not in for another month. The last update I got was for February 2022 but I am not holding my breath.

You get quite creative working around the problems I can tell you. ;0(
 
I've had a starter made in China, regulator made in Vietnam, tires made in Poland so it make sense if stuff is backed up at ports then there is probably a shortage on the shelves.
 
I tried to order a pair of Wolverine work boots. I had to settle for a pair a little wider than I wanted. Most are probably still setting off the California coast on a ship, waiting to be unloaded. Stan
 
On 60 minutes, a guy said that the container of his stuff is buried under and behind other containers and that it will be months before it will be delivered to him. AND he is being charged rent for them to store it.
 
I buy a lot of parts for large commercial projects. Shortages are hitting every sector. Raw process material has been especially hit hard, like stainless sheet, cold rolled sheet, and aluminum extrusion. Materials that used to be in stock are now to 8-10 weeks if you can get them. That delay gets pushed thru the entire supply chain so the finished parts coming out the other end are even more delayed. Right now I have a semi load of enclosures we can ship today but we do not have the screws to install the covers. Enclosures go in before the conduit, conduit before the wiring is pulled, walls can't close up until wiring is done, paint and finish can't go on until walls are closed, etc. etc. So we just keep falling over each other again and again.

If you follow Metal Market, a lot of the plant hours are up to same as two years ago, but the output in product is 7-8% less. Reasons might be less experienced workers, struggles getting their raw materials, and machine breakdowns take longer because those parts are short too. One supposed expert says the cost of metcoke (metallurgical coal) is now more than the ore itself, so some of the pain might be self inflicted. They say those plants are switching to smelting scrap but I'm not sure they can make that change that easily. One thing for sure, no one in my part of the world is seeing any relief anytime soon.
 
Biggest problem is a labor shortage. Plenty of product, but it is sitting in containers on ships because there's not enough dock workers available to unload it and drivers available to haul it away.

These aren't jobs where you can be effective on Day 1. For example, you decide today that you want to be a truck driver, and have never driven a truck. You probably will want to go to a driving school to get your license, and then that only means you can make the truck move. You still need months of on the job training to learn what to do with the truck.

It amazes me we are short of these types of workers, because these types of workers are generally the ones complaining about the people who sit back and collect unemployment instead of going to work, even if unemployment pays better.
 
Not doing a plug for the company, but do some automotive part searching on RockAuto and you see huge price increases and shortages. Just about every long block for any application is out of stock. A lot of it is parts made by people doing hourly work, for reasons I wont mention here.
An engineer buddy of mine also said there is a nationwide shortage of rosins, used to manufacture just about everything. Case in point: Just yesterday, I went to several hardware and electrical shops looking for a single old wall (remodel) Carlon electrical box. NOBODY had one, with the exception of.drum roll please.WalMart.
 
I was at the Local Rural King store this morning, here in central Ohio,, It was packed full of products of all kinds the isle ways were crowded with pallets full of all kinds of things even the gun cases were full,,I have never seen it so full,, I was surprised..
 
I guess I'm lucky I have not had problems with parts nor supplies. Get things in s day or 2 or on stock orders just fine. Tractor truck and auto parts. Prices i have not bought much since last summer so may get sticker shock in future. I keep hearing about the magical 1,000.00 ton fertilizer. Not seen it yet though. And not saying it is not there just not seen it yet.
 
We have a local family building a huge truck stop here in Mankato. Suppose to open October 1. Not open yet. I talked to him yesterday
Said they are waiting on parts of the passenger elevator and some main electrical component .s
 
Gary,
When I was starting out, I would buy used starters, alternators, brake drums from auto salvage.
I would also go to town to a place where the guy rebuilt alternators and starters.
He would sell me the parts I needed to rebuilt my own.

Then Auto Zone came to town and that ended my trips to auto salvage and rebuilding my starters and alternators.

No place I'm aware of in town that rebuilts any things.

I Remember many machine shops needed to rebuild engines,

Many places rebuilt electric motors.

Who knows, some people may have to learn how to rebuild things again.
 

I read last night brake rotors are in short supply some are knocking the dust off there brake lathe.

There is also a scare of a shortage of 134A refrigerant that's nothing new other than it normally in the early months of the year.
 
HoBo
I've yet been about to have a rotor turned.
They claim after they are done rotor is too thin, out of spec,
They don't charge, just want to sell me a new one.
Anything wrong with using a turned rotor out of spec?
 
Funny that this topic comes up after calling the tire dealer Monday. I just talked to them about a Firestone rear tire and a 20.8 X 38 radial will not be available for months. BKT supply is running low. They are expecting problems for next spring in terms of supply period.
 

Geo it rare I turn one, not to go into deep detail yes there is danger in turning a rotor below manufacture minimum discard spec.

Yes the market is full of used brake lathes as we have got away from that. Mine will stay here mainly to resurface new captive rotors and the occasional brake drum. The good captive rotors are about a thing of the past as is drums.
 
I haven't had to order any parts in a while, but we're having trouble getting materials for our roofing company. 3 week wait for shingles that are normally in stock. Any aluminum sheet product (trim coil, drip edge, flashing), and the underlayment board that goes under flat roofing is non existant. As soon as any suppliers get it in, its gone. Caulking is limited. Lots of siding and roofing colors have been temporarily discontinued for some reason. We have enough work signed up to get us through January right now. We went ahead and ordered material for every job on the books. Whatever material comes in is what we schedule. In years past, anything we need was in stock at suppliers or a few days away.

I don't know if it's the shipping delays, the fact that construction is busier than normal, or both. Every contractor I know is flat out swamped with work.
 
Ive seen some odd things going on with PVC related items.A plastic part for a Stihl saw has ben on backorder now for months.I needed five ten foot lengths of three inch PVC for a little job,yesterday Lowes was out.At 7 this morning they had 30 in stock.I went there and there was a cart sitting in front of the rack,full of the pipe.The guy that worked there said it must be there to be put away.He helped me load 5 of them.I paid,loaded them in my truck,A guy came running out saying I had taken his pipe.I asked if he had a job going where he needed it today,and he told me that he was just stockpiling it because of the shortage.I drove off.They told me at Lowes they are getting it OK,but stock is a little spotty because of the hoarders.
 
Not exactly sure why my right rotor warps more than left.
I'm only guessing water collects on right side of road.
Water splashes on hot rotor, warping it.
Also guessing when pulling a trailer, brake controller works on sensing truck is slowing. So the front brakes have to work harder before controller starts working causing excessive wear. heat, on front brakes.
 
(quoted from post at 16:32:51 11/18/21) Not exactly sure why my right rotor warps more than left.
I'm only guessing water collects on right side of road.
Water splashes on hot rotor, warping it.
Also guessing when pulling a trailer, brake controller works on sensing truck is slowing. So the front brakes have to work harder before controller starts working causing excessive wear. heat, on front brakes.

GM's Grrrrrrrrr.... I am not sure they ever made a good brake set up... No other make has the issues GM has...
 


Our businesses did this to themselves. Warehousing is expensive, it ties up capital, it requires a lot of guesswork on what will be needed and when and how much. "Just in time" delivery saves a lot of $$$ for them. OTOH, when more product is going out than coming in, you're going to run out eventually. So what do we do? Well, as George and others have pointed out, no one becomes a trucker, starter/alternator rebuilder, appliance repairman or engine rebuilder overnight. And the relatively few places we still have in the US making the basic components we need can't carry the load that has been outsourced over the past 30 years. Then there's the whole regulation/taxation end of things. They've pretty much killed mining here in the US. Doesn't matter what for, it's just not anything like it was. Same for logging, making metals, etc. Takes years to build some of these facilities and they all require basic stuff we don't produce here. Then there's the other end of that regulation/taxes thing- you can't hamstring any startup and expect them to succeed. Oh, and lets not forget stupid rules! I understand California won't allow owner-operator truckers to work in that state! Give me one good reason why anyone would pass a law like that that isn't a direct response to corporate/union payola! Then there's the whole finding workers end of it. Show me a percentage of the young people today that desire to do any of the work we need done. It's not what it was. Yeah, there are kids out there that weld, run a forklift, drive a truck or learn how to rebuild things- but it's not a big percentage. And even fewer will do the bend and lift and shovel routine. Why? Because they aren't hungry. One of the problems with creating a social safety net is that it can reach the point where it's just as , if not more, lucrative to sit home smoking pot all day and watching TV than it is to get up at 4:30AM and work an 8 or 12 or 14 hour day. And find out how many of those people are willing to work in the hot sun or cold wind and snow at all! Most want an inside job that's air conditioned or heated.

I could go on pointing out the obvious for hours, but I'm sure you get the point. Our nations chief health concern with our poor is obesity. That alone should tell you that we've allowed a really screwed up paradigm to flourish. No, I don't have an answer on how to fix it, but I do think it will fix itself. We are headed for a war, a civil war, and a major depression of 1930's proportion. That or a "communist" revolution. I use quotation marks because no one really wants communism except the people who intend to be in charge, because they won't bear the problems communism brings.
 
A funny thing I saw on my 1998 Dodge 1500 P/U was the GM logo cast into the disc casting while I was replacing the pads one day.
Can't recall just now but there have been other similarities that i found between the two companies and makes me wonder about any
co-production on auto parts to increase volume and reduce manufacturing costs.....maybe it was the multi part pressure formed
frame that I think I recall Dodge invented years ago.....again recalling, rusty, may have the frame thing reversed but both were similar.

The slanted windshield thing too. The problem I have with the slant is that used to be you could see out the windshield without the
dash getting reflected back in your face and forcing you to use polaroid sun glasses when you drive in the sun. My 2007 Ram 1500
had that glass and when I bought my current 2011 Silverado 1500 it too was laid back in similar fashion and drives me nuts......
 
There was talk of shortages in some stuff even before the past weekend disaster on the West coast. Our biggest port, Vancouver, was completely cut off from the rest of Canada due to floods taking out the highways. Even the rail lines are questionable at this point. Sounds like our grain movement to port might come to a standstill. Herbicides like Glyphosate were already short by harvest time and prices doubled before they ran out. Will we have them for next spring? Fertilizer? At this point it is all a big question mark and I'm a little concerned.
 
My Son Works At Caterpillar Engine Plant, normally lots of overtime, they cannot get parts to complete Engines and send them out, he says lot of them in containers off shore, Cat does have a plant in China that makes Parts. overtime is Shut off and Hardley anything to do.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top