guido
Well-known Member
Hello,
While replacing the head gasket I noticed one of these pawl was
stuck. Its a small leaf blower , and the head was 1/4 in or more
away from the thd block.
Vibrated so bad it shook itself apart. Good place to look if your
blower is vibrating excessively.
The pawls fly out like fly weights, and align with the blower wheel
for air flow channeling.
Here is the picture,
Guido.
While replacing the head gasket I noticed one of these pawl was
stuck. Its a small leaf blower , and the head was 1/4 in or more
away from the thd block.
Vibrated so bad it shook itself apart. Good place to look if your
blower is vibrating excessively.
The pawls fly out like fly weights, and align with the blower wheel
for air flow channeling.
Here is the picture,
Guido.