Pics from upcoming consignment

[Fordfarmer]

7600 was a no-show at the time I dropped off my old truck. It was getting late in the day and 2 boys (and my wife) were wanting to be moving, so I only got 1 shot each of the 3 Fords that were there. Any guesses as to prices? I haven't been to any sales yet this year, so I dont' have any idea how high things will sell. I'll mail out a Ford-scripted tire gauge (recent ebay purchase - got a bunch of them)to whoever comes closest on the prices.

 

[Brian in MA]

Here's my guesses, first is an 8000 (I believe?) - $5500, TW 20 - $8500, 7710 - $9800. I dont' know any conditions or your market, so these are no better than WAG.

 

[Fordfarmer]

Yep, the first one is an 8000, and right now you know about as much about them as I do... all I did was drive by. I'll look them over on Sat.

 

[paul]

8000 - $5975

TW20 - $12,900

7710 - Depends on how that front axle is, $9500.

--->Paul

 

[Roel.belgium]

dang, checkout that TW...savage looking tractor.
wish I had one.

I notice the price is quite high on the other end of the pond. TW20's would go for 8000 euro over here.

Roel.

 

[Brian Allen]

Fordfarmer
8000 = $5,000
TW20 = $9,500
7710 = $11,000
Good luck everyone!
Brian

 

[Gwiz]

8000--$5900
TW-20--$9700
7710--$19200

 

[karl f]

8000 for $8000
tw20 at $10,000
7710 at $16500.

karl f

 

[Fordfarmer]

Just for grins, here's my guesses:
8000: $4750
TW: $10000
7710: $11500 (with loader)

 

[Fordfarmer]

OK, a quick rundown of what I saw... Hard to fault the 8000 other than the rear tires at 15-20%. 7710 had inoperable a/c and fwa, but that wasn't announced - told to me by a guy who knows the frm it came from... could be the switch, the clutch, or ?? Otherwise seemed pretty decent. TW needs some TLC - engine oil leak (rear main?) significant p/s leak, no brakes, rear tires no more than 20%, lots of little odds and ends that need attention. Also saw a 9N with a Paulson loader and Sherman (not a combo), didn't get the price, and the Ford loader was a 1-arm trip with what I think are 3-cylinder mounting brackets. Will post pics of that later.
Looks like Brian in MA is closest... his total of $23800 is $4900 higher than the combined sale prices of $4900 for the 8000, $3600 for the TW, and $10400 for the 7710.

 

[Gwiz]

Seems really cheap for the 7710 considering the $4-5000 loader.
James