pictures SC4

[s,mac]

Here are pictures of the latest Case addition. 1954 SC4 and two way disk plow. Engine is stuck but will start soaking it. I told my wife four tractors ago I was not going to buy any more. O well. Steve

 

[Don Rudolph]

A wise man once said, " You can never have too many Case tractors." My wife would like to have a word with him. LOL

 

[Christopher Mikesell]

Wow, I didn't realize that you could add front wheel weights to the 16" front hubs. I will need to get my hands on a set of those weights.

 

[Tubacase47]

Don, maybe that's why I've never had a wife.

 

[oldproudvet]

A comment by my then 10 year old, tractor loving, son had me thinking.......We were figuring out how to stash a couple of auction picks (early Case items) and we were looking at a line north of the barn of older eqpt. Young son said "dad - If move these 2 in from the back side of the row, rather then the front, Mom will never notice 'cuz the grass won't be bent.............." Felt guilty at the time, now I think he was being raised right........

 

[Bruce from Can.]

That looks like a fair chunk of a tractor. How many hp would that be? I try to buy the two tone tractors , and my wife don't know how many I have ,so long as they aren't in the same yard at the same time Keep some at one farm, some at the other. If she asks me some thing like "this one looks new " , I just say oh must be just the way the sun is shining on it. Not real sure it is working, she might be catching on.

 

[Glenn/Mn]

damn you guys are lucky, I have one of these torn down, but have given up looking for parts tractors, yours even has the hitch, you are way ahead of me even being stuck

 

[s,mac]

It appears that every thing but the front axle and bolster is the same as a late SC. What parts do you need? Steve

 

[s,mac]

My 50 SO has the same front wheel weights. Steve

 

[jlwin]

I have a good block with a recent rebuild for an early sc, took
it out to put the correct big bore engine back in!!

 

[Christopher Mikesell]

The 1953 and 1954 SCs should make around 30hp-32hp pto in good stock condition. They do noticeably better with M&W overbore sleeves and pistons, and can easily exceed 34hp with minor modifications.

 

[CKRICHARD]

Late model SC have a front hub with 3 bolt for the 16 inch wheel ( like on DC) and 5 bolt 15 inch wheels. I'm not sure when it's started my 53 has the duel bolt pattern . Not sure about the 16 inch 3 bolt but my 15 inch 5 bolt wheels has the 4 holes to bolt on the frount wheel weights to. As others have said that weight is use on the pressed steel wheel with 4 J hooks .

 

[Christopher Mikesell]

The late SC3 and SC4 tractors had cast 16" wheels with the 5-bolt pattern. My SC3 has them. They are "fuller" and noticeably heavier than the cast 15" wheels.

 

[CKRICHARD]

Does your tractor have the dual bolt pattern hub? I see the that SC4 above does.

 

[Christopher Mikesell]

Yes, my tractor does have the hubs with both bolt patterns, and it also has a factory AWF.

 

[standard fan]

That's a decent looking tractor, I have an SC-4 with eagle hitch that is in similar condition but your fenders look better then mine. Its hard to tell from the pics but it looks like the bottoms of your fenders aren't rusted out like mine. I also have a SC-4 that is a straight draw bar tractor but it is painted. I posted a picture of it in an earlier SC-4 thread.

 

[NickatKY]

(quoted from post at 22:51:52 11/20/15) Late model SC have a front hub with 3 bolt for the 16 inch wheel ( like on DC) and 5 bolt 15 inch wheels. I'm not sure when it's started my 53 has the duel bolt pattern . Not sure about the 16 inch 3 bolt but my 15 inch 5 bolt wheels has the 4 holes to bolt on the frount wheel weights to. As others have said that weight is use on the pressed steel wheel with 4 J hooks .

The late adj wide front DC's also have the 3 and 5 bolt hubs. I have a Case bulletin that gives the serial number break for the change.
Here is a pic of my late DC with the dual bolt hubs.