PLEASE HELP ME FIND

[SPMN]

PLEASE HELP ME FIND. I'm trying to help a friend that doesn't do computers locate a John Deere 435 right hand pitman arm part # T12200T for a heavy duty swept back front axle. If you have one for sale or can steer me in the right direction to find one, it would be greatly appreciated. Do any other Deere tractors use this same arm? I'll try to post a picture of a left arm with the correct part # for a right hand arm since he doesn't have the right hand one.
Thanks for the help
Kent Gordon
903 391 7626 or
[email protected]

 

[WalJohn]

PLEASE HELP ME FIND. I'm trying to help a friend that doesn't do computers locate a John Deere 435 right hand pitman arm part # T12200T for a heavy duty swept back front axle. If you have one for sale or can steer me in the right direction to find one, it would be greatly appreciated. Do any other Deere tractors use this same arm? I'll try to post a picture of a left arm with the correct part # for a right hand arm since he doesn't have the right hand one.
Thanks for the help
Kent Gordon
903 391 7626 or
[email protected]

Is this it?

https://www.tractorpartsasap.com/steering-arm-right-hand-new-john-deere-102706.html

 

[kb46852]

Doesn't look like we have stock for a T12200T in new or used. Keep checking back, we get parts in all the time.

 

[kb46852]

Is this it?

https://www.tractorpartsasap.com/steering-arm-right-hand-new-john-deere-102706.html

​

​

Not for the 435 but I appreciate the effort!​

 

[Jim.ME]

Is this it?

https://www.tractorpartsasap.com/steering-arm-right-hand-new-john-deere-102706.html

No, the 435 was the 430 ag tractor with a GM diesel engine, That arm is for newer larger tractors. The part number he is looking (T12200T or T12200) for no longer comes up in a search by part number on the JD parts site nor can I pull it up through my dealer's site. No substitution number comes up either.

 

[Jim.ME]

PLEASE HELP ME FIND. I'm trying to help a friend that doesn't do computers locate a John Deere 435 right hand pitman arm part # T12200T for a heavy duty swept back front axle. If you have one for sale or can steer me in the right direction to find one, it would be greatly appreciated. Do any other Deere tractors use this same arm? I'll try to post a picture of a left arm with the correct part # for a right hand arm since he doesn't have the right hand one.
Thanks for the help
Kent Gordon
903 391 7626 or
[email protected]

What salvage yards have you (he) checked? Were phone calls made to salvage yards or just viewing what might be shown their line websites?

903 puts you in Texas?

 

[kb46852]

What salvage yards have you (he) checked? Were phone calls made to salvage yards or just viewing what might be shown their line websites?

903 puts you in Texas?

I have access to inventory at all of these yards:

https://www.tractorpartsasap.com/locations

 

[showcrop]

PLEASE HELP ME FIND. I'm trying to help a friend that doesn't do computers locate a John Deere 435 right hand pitman arm part # T12200T for a heavy duty swept back front axle. If you have one for sale or can steer me in the right direction to find one, it would be greatly appreciated. Do any other Deere tractors use this same arm? I'll try to post a picture of a left arm with the correct part # for a right hand arm since he doesn't have the right hand one.
Thanks for the help
Kent Gordon
903 391 7626 or
[email protected]

The 420, the 40 and perhaps even the M would be the same.

 

[kb46852]

The 420, the 40 and perhaps even the M would be the same.

Correct. We automatically cross those and show every application.

 

[SPMN]

What salvage yards have you (he) checked? Were phone calls made to salvage yards or just viewing what might be shown their line websites?

903 puts you in Texas

 

[Jim.ME]

The 420, the 40 and perhaps even the M would be the same.

The swept back axle was used on the 420, not the 40, M, or the 440 industrials according to the parts catalogs. That arm was only used on the sweptback axle apparently, not the other front axles.

 

[SPMN]

Thanks for your reply. I am in Texas. I've tried Lind Brothers & Huck Brothers. Also, Farmer John's, but he's out of town until next week. He'll look then. I understand that it's the same as the 420W & the 430W tractors with the swept back axle.

 

[SPMN]

I have access to inventory at all of these yards:

https://www.tractorpartsasap.com/locations

I tried then, but no luck. Thanks

 

[fusion1]

PLEASE HELP ME FIND. I'm trying to help a friend that doesn't do computers locate a John Deere 435 right hand pitman arm part # T12200T for a heavy duty swept back front axle. If you have one for sale or can steer me in the right direction to find one, it would be greatly appreciated. Do any other Deere tractors use this same arm? I'll try to post a picture of a left arm with the correct part # for a right hand arm since he doesn't have the right hand one.
Thanks for the help
Kent Gordon
903 391 7626 or
[email protected]

Check with Wengers of Myerstown Pa phone 717-866-8424
they show a JD 435 they are parting out and there is a rt and lf one listed

 

[SPMN]

Check with Wengers of Myerstown Pa phone 717-866-8424
they show a JD 435 they are parting out and there is a rt and lf one listed

Thanks for the lead. I called them, but it's gone.

 

[KLPinNC]

PLEASE HELP ME FIND. I'm trying to help a friend that doesn't do computers locate a John Deere 435 right hand pitman arm part # T12200T for a heavy duty swept back front axle. If you have one for sale or can steer me in the right direction to find one, it would be greatly appreciated. Do any other Deere tractors use this same arm? I'll try to post a picture of a left arm with the correct part # for a right hand arm since he doesn't have the right hand one.
Thanks for the help
Kent Gordon
903 391 7626 or
[email protected]

 

[KLPinNC]

PLEASE HELP ME FIND. I'm trying to help a friend that doesn't do computers locate a John Deere 435 right hand pitman arm part # T12200T for a heavy duty swept back front axle. If you have one for sale or can steer me in the right direction to find one, it would be greatly appreciated. Do any other Deere tractors use this same arm? I'll try to post a picture of a left arm with the correct part # for a right hand arm since he doesn't have the right hand one.
Thanks for the help
Kent Gordon
903 391 7626 or
[email protected]

 

[HFJ]

many (most?) of us here may miss out on the coming days where u just turn your printer on with the data for the part u need, and just wait while your printer makes u a new one.

i'm still ticked about my lack of a flying car - CURSE YOU, GEORGE JETSON! - but boy, it's getting close.

jmo, but we have been honored to live during mankind's most frenetic burst of <technical> progress to date. i still remember Eisenhower behind the desk, and i literally remember those days like the stone age by comparison. for my money, the technological progress we've made between then and now is nothing short of astounding. i can't wait to see what's next.