power steering cylinders

[Boomer]

I have a case 430 not to sure of the year around 65ish has the dual cylinder front end. the serial number tag is gone. I have been told with that front end around 800000 up. Having trouble taking the pistons off. I dont have the right tools anybody else run into this problem, thanks Chris

 

[olgentdc]

They are a Bear ,, But I did mine , and it reallywas not that bad , removethe hose fittings on the Barrel,, Locate theSnap ring inside the barrel on The end of cylindar and Pry Off ,, Goes back on the same way ,, lots of cylanders Use this trick ... 812-969-2123 if you need a talk thru ...

 

[Boomer]

Thank you I will prob give you a call one other ? were your welded cylinders

 

[olgentdc]

exactly like yours .. no cutting or welding required ..

 

[Boomer]

i put a post about serial number on my 430 could u help me try 2 figure it out here is my e-mail [email protected]

 

[Boomer]

JH just took apart my steering cylinder that is easy once you what your doing

 

[olgentdc]

Good , just happened to see this jump up , I f Ya need help or have ??? MAKE a NEW post because no-one ever goes back to visit Archives except to retrieve info .. Best wishes jh