power steering

bugg1943

New User
ford 941 with hv 4902 hydraulic adapter on top of the transmission can i tee off pressure port go to the loader valve take other side of tee to power steering cly. tee return and bring my power steering return back to where it returns into the case
 
No. The power steering would be second in line, and subject to interrupted flow with loader use. A priority valve is used as a first in line device to create a division of the entire pump
output to guarantee pressure to the PS system. (I assume the 941 port you wish to tap is always on hydraulic, not clutch pedal sensitive). if plumbing is way hard, a PS pump from a car or
light truck can be drive from the front belt pulley system, though that can also be difficult. Jim
 
I do not think much of using the hydraulics on the older low flow systems, by the time you tap off with priority valve, not much left.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top