powertrol

[unstyled Bob]

Is it possible to run a single acting cylinder of a model 60 with powertrol,when there is no return port for the cylinder? And how do you set it up if it is possible?

 

[Bob Harvey]

You need the correct plugs to run a remote. You can get away with 1 if you plumb the return line into the fill plug. HTH

 

[unstyled Bob]

There is no return line

 

[gtx1967jewison]

Works fine. Just move lever opposite way &I gravity returns it.

 

[gtx1967jewison]

Don't need any plugs. Just plumb into fitting right below the original plug port. If it don't move the way you want use other port.

 

[TRACTORNUTJD]

Do this with a 70 all summer long on the mower conditioner. just plu in one hose and gravity lowers the unit. Benn doing since we bought the mower 10 years ago

 

[Bob Harvey]

I'm a tad baffled (not unusual), if you induce oil into a remote cyl. to open it(extend) and since there is no 'down force' on the powertol, gravity reverses the process (or the other way around, you LIFT with the powertrol and gravity lets it down, WHERE does the induced oil go ???