PRIMER AND PAINT PLEASE ADVISE

tractormdnut

New User
Hi to everyone i need some advice
i am restoring a farmall m and have it completley apart i want to prime and paint hard areas to get to as i put back together but most likely wont paint entire tractor till spring of next year what kind of primer should i use and anything special to do when painting hard to get to areas then in spring do i just sand over painted pieces i can reach and repaint?
sorry for being a newbie lol
 
You won't get a good job with the tractor assembled primed or not. You can paint the chassis and the parts with epoxy primer (PPG Omni MP 170 is an example). You can let it sit the rest of the summer and all winter, but you will have to scuff each part and the chassis and give it another coat before topcoating, as it has to have a chemical, not a mechanical bond between the epoxy and the overlying paint. There is a 3 day window to topcoat without scuffing and reapplying. Epoxy is waterproof, so with good coverage it won't rust -- that is not true with any other primer. As to the hard to reach places, that is why you disassemble. You will get either poor coverage or drips and runs if you paint an assembled tractor, that is if you want a good job.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top