primer/rust stuff

snoop-nc

Member
Long story made short...made a bumper for front of Freightliner using 10in. channel. Metal, of course, has surface rust. I'm not interested in painting/finishing bumper to a mirror shine...will probably use the rattle can technique...multiple light coats over primer.

QUESTION: I've heard of "stuff" that turns light/surface rust to primer. Does that stuff work? Where can I find it? Cost is not really a major consideration.

Thanks in advance.

SNOOP
 
Sem makes a product callee rust seal can buy it at auto body supply also at your local orilys you can buy some in a rattle can will be cheaper you will have to sand the rusty area with 80 grit to open up the rust the coverter will not go threw thick rust it works well I use it on inner pnls on auto restoration
 
Thanks, BASTION...

Do I understand that sanding rust does NOT mean down to bright metal?? I'm dealing with surface rust.

The rust sealer stuff functions as a primer???

Thanks again...Snoop
 
you dont remove all the rust the coverter needs some rust to do its thing but you have to sand it some to open up the surface before applying. the rust seal turns black when it drys after it drys you should lightly scuff it with a red scuff pad and then prime or paint
 
BASTIAN: Thanks...that's what I wanted to know...seems simple/easy enough for me as I'm looking for easy way out.

Snoop
 
That channel steel has a producr sprayed on it when manufactured that is supposed to help prevent oxidation (rust), You need to wipe that off first. Use acetone and a scotchbrite pad, couple of passes. Then a clean rag.
Then sand it down with a DA sander and the 80 grit. Then apply an etching primer. You can get that in a rattle can. Light sand with 220.
Then you are ready to paint, and you won't have to do it over again.
 
The best I have used is OSPHO (os-fo). It comes in gallon containers, brushes on. Apply heavy then onec dry, hit it with a wire brush and rinse with a hose. It is thin like water, and goes a LONG way. Do not use a good brush. Basically it is phospheric acid. Once cleaned of residue, paint right over it.

Charles
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top