Andy C

Member
I replaced the live hydraulic pump seals in the neighbors IHC 300. Hydraulic oil was being pumped into the engine. We noticed today that the hydraulic oil is low and the engine oil level has gone up.The old seal was hard so I thought I was on the right track. After cleaning the shaft with Scotchbrite I re-assembled being very careful to not damage the seals. The shaft showed some wear but barely noticeable with the fingernail. Any ideas out there for a repair idea? Any ideas/comments appreciated.
Thanks,
Andy
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top