question on my 188D engine

[jakecase]

I have what I believe to be a 1961 case 430 triple range diesel, I have just recently got it running and at about 3/4 throttle it starts to though oil out the dipstick...the dipstick is very loose, is there supposed to be a gasket or "O" ring on it to stop this?

 

[VAC400]

According to the Case parts list it has a seal part number G46892. GO TO THE CASE PART WEB SITE AND FOLLOW THE LOG IN. Type in 430 , go to engine, it will give you gas and diesel, the diesel has 2 short blocks, look and see which one fits. Jerry from Ohio

 

[jakecase]

(quoted from post at 04:51:45 03/26/21) According to the Case parts list it has a seal part number G46892. GO TO THE CASE PART WEB SITE AND FOLLOW THE LOG IN. Type in 430 , go to engine, it will give you gas and diesel, the diesel has 2 short blocks, look and see which one fits. Jerry from Ohio

Thanks very much for the info Jerry
Doug from Ontario

 

[jakecase]

turns out it was the injector pump shaft seal ....but all fixed now