quick hitch C and 300 utility

[glacier-tractor]

Is the quick hitch on a C and a 300 utility the same size?

 

[gab]

Fast hitch? No

 

[Janicholson]

The prong size is different, and the tractor frames are not even close to the same. A Farmall C is way smaller than the 300U which is based on a H series tractor. Jim

 

[Dave H (MI)]

If you are talking about prong size, no. The 300/300U is the smallest tractor that takes the larger prongs. If you think of it as roughly the next evolution of the Super H then you see the issue. So if you are looking at an implement someone used on the 300...

 

[glacier-tractor]

I'm going to sound like an idiot here, but I'll ask anyway. If I bought a plow with a fast hitch for a C, it would not fit the 300U, right? The reason I ask is I see a lot of talk about spacers...

 

[Jim Becker]

That combination requires the spacers.

 

[Farmallhal]

The spacers are for using the smaller fast hitch prongs on the tractors with the larger fast hitch sockets. They are a flat piece of steel to fill the gap on the bottom when used on the larger size fast hitch tractors. One thing you need to be aware of is a lot of fast hitch implements are not interchangeable between the utility and row crop models by design. You need to do some research on applicability of implements when using between a row crop like the Super C and a 300 Utility even with the use of the spacers. Good luck with your implement purchases, Hal.

 

[gab]

A small point plow for a Super C will fit a 300 if you use spacers under the points. Somebody on her recently had pictures and dimensions to build a set if you need some.