R pony engine-compression

lynn herring

New User
Recently bought a '53 model R. Can anyone tell me what the compression should be on the pony engine (cranking eng)?. I did a check and both cylinders show 85-90 lbs. Is this within the ballpark? I do have the JD operator & service manual, but I don't see the compression listed in them. Thanks for input.
 
I don"t have a listing for the compression pressure, but I think 85-90 is in the ball park especially since they are equal. Remember, the R was built with a rope start on the pony, the upgrade was electric start. If the compression pressure was that of todays engines, I doubt that rope start would be acceptable.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top