Re: JD 300 Industrial

SV
Do you frequent any other discussion forum similar to Yesterday's Tractors that a post replied to today may have the topic title several pages(days) back on the Classic forum format?? YT is the only discussion forum I frequent that is this way. FYI I was having ISP time out problems & my replies were made utilizing your wonderful Classic View.
 
Modern screw is the problem nobody knows who’s talking to who and then you get this crap Of posts scattered across ten pages and mixed with 20 other posts yay modern view 🤢
 
Never timed out ever once oh and another thing never have a problem with replies scattered across ten pages but hey it says modern it’s gotta be good
cvphoto69095.png



cvphoto69097.png
 
Closed center (of all makes i think) are not the same in valving, pumps, or basic design. An open center system is going to be dead headed into a
plugged return. This creates a forced bypass of the relief valve dragging down the engine, and making heat very quickly. Be aware they are not the
same animal. If it really is a closed system, and it is connected incorrectly, it needs to be carefully setup as a closed system, not just blocked
with a plug. Research the tractor with notation of serial number breaks where Open or closed systems were changed. Jim
 
This is about a ten page conversation on modern view that is now scattered one reply randomly inserted across 3 time zones and 30 pages of classic view
 

Are you sure this problem you speak of is caused by Modern view or could it be caused by Horse & Buggy style Classic view?

On Classic view threads recently replied to may be 3 or 4 or as you state 30 pages back BUT on Modern view if a thread is replied to this AM depending on amount of forum traffic will be on FIRST(1st) page. The replied to thread rising to the top reminds me of what cream does on fresh cow's milk back when I hand milked cows in my youth!!!

Chris the forum moderator has already stated thread titles with more than 50 spaces causes problems on Classic view which ultimately causes problems for both forums.

IMHO Chris has done an excellent job trying to synchronize both views on this forum. Actually it's my understanding the Modern view Chris is utilizing isn't really that Modern it's just an advanced version over the Ancient Classic view. :roll:

I hope you have a wonderful day, Jim
 
AT56458 doesn't appear in JD 165 BH parts catalog on JD parts site but very old part #s won't show up in my search. What type valve does that CC
plug fit. Closed center plug I located in 165 BH catalog is GT4698(key 32). See photo below


cvphoto70027.png


cvphoto70028.png
 
Jim
It appears that when replying to a thread that has RE: in the thread title regardless which view(Classic or Modern) is utilized the replies end
up astray!
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top