Rear forks

[b.mckay]

Todays project - refurbished and old set of forks that were given to my and modified them to fit my 3 point. I think they will be handy to stack logs on them and haul them out of the bush, and of course moving pallets etc around. One day maybe I will add a hydraulic top link.
[/img:2abadf8c66]

 

[b.mckay]

tried adding photos with no luck lol

 

[b.mckay]

 

[Jim.ME]

(quoted from post at 20:21:25 01/16/21)

Keep trying your pictures. Due to the site spam filters, new users generally need more than five posts on record before the site will allow you to post pictures.

 

[thehickdaddy]

3 point forks have a 101 uses

 

[SVcummins]

The picture gods on here can be a Little angry at times . Try
again . When the picture is loaded it will say photos uploaded
sometimes it takes a minute or so . Before I had loaders
everything I did was with a rear mounted bale fork when it
wouldn’t lift high enough then i had to figure another way to
lift whatever it was

 

[b.mckay]

(quoted from post at 01:43:23 01/17/21) The picture gods on here can be a Little angry at times . Try
again . When the picture is loaded it will say photos uploaded
sometimes it takes a minute or so . Before I had loaders
everything I did was with a rear mounted bale fork when it
wouldn t lift high enough then i had to figure another way to
lift whatever it was

Thanks! Yes this is exactly what I had in mind! Rather then dragging logs through the dirt and dulling my saw

 

[b.mckay]

 

[Jim.ME]

(quoted from post at 07:31:38 01/17/21)

Size of the picture can keep it from posting as well. 7.5mb (total, one picture or several together) per post is the size limit I believe. Check the settings on your phone/camera to picture size may need to be reduced.

 

[Traditional Farmer]

I bought a set of 3pt forks at an auction that have a cylinder on them to raise the forks as well as using the 3pt to raise them.Only down side is a tractor with 2 remote hook ups is required to use it and the hydraulic top link.

 

[gtractorfan]

I bought a pair of forks from Craiglist and the local vocational school welded the frame- the teacher thanked me for giving his
students a practice project. It's on a Massey Ferguson 165.

 

[thehickdaddy]

Haul logs to the buzz saw
Haul fence posts
Haul tote boxes or pallets of tools or supplies.
Cradle and drive away with tractor or combine tire

In spring time we put duals on Ferguson, and stay braces to hold the height, and good pallet or sheet of ply wood on forks to carry gopher traps or water and spray suppliers to keeping up on fence rows

 

[b.mckay]

(quoted from post at 17:17:38 01/16/21) Todays project - refurbished and old set of forks that were given to my and modified them to fit my 3 point. I think they will be handy to stack logs on them and haul them out of the bush, and of course moving pallets etc around. One day maybe I will add a hydraulic top link.
[/img:15c2d7df98]

 

[cleddy]

(quoted from post at 01:17:38 01/17/21) Todays project - refurbished and old set of forks that were given to my and modified them to fit my 3 point. I think they will be handy to stack logs on them and haul them out of the bush, and of course moving pallets etc around. One day maybe I will add a hydraulic top link.
[/img:c4b5d5afeb]

hat is creative-Now I have a old Forklift that the Mast would make a good 3-point attachment?Cleddy

 

[SVcummins]

Is that the one that can load bales on a trailer

 

[b.mckay]

(quoted from post at 05:32:15 01/19/21)

(quoted from post at 01:17:38 01/17/21) Todays project - refurbished and old set of forks that were given to my and modified them to fit my 3 point. I think they will be handy to stack logs on them and haul them out of the bush, and of course moving pallets etc around. One day maybe I will add a hydraulic top link.
[/img:f92de0e22b]

hat is creative-Now I have a old Forklift that the Mast would make a good 3-point attachment?Cleddy

Yeah thats where these came from. I want to upload a picture but Im having issues lol

 

[b.mckay]

Yeah that is where mine came from I want to upload a picture but I cant figure it out lol

 

[Traditional Farmer]

These are similar but somewhat heavier built than the ones I see advertised now,but no problem loading bales on a truck or trailer.

 

[SVcummins]

I always wanted one of those but by the time I went to buy one i couldn’t find one

 

[RobCons]

I've got a set for the 3 pt hitch. They come in handy espicially installing heavy gates. Just set the gate on the forks, back up to the hinges, line hinges up with the leveling box and sit the gate right down onto the hinges.