remote hydraulic control 9n ?

[manya77]

I sent a picture of this to Zane re compatibility with his Thang. This control is just below quadrant
He suggested I post pictures here, apparently quite unusual. This 9n also has the OEM cut out some found unusual

 

[mhb@ufe]

It is disconnected from the hydraulic system so it would have no effect on the zane thang unless it prevents the handle from going down all the way.

Mark

 

[TheOldHokie]

(quoted from post at 16:29:22 07/16/15) I sent a picture of this to Zane re compatibility with his Thang. This control is just below quadrant
He suggested I post pictures here, apparently quite unusual. This 9n also has the OEM cut out some found unusual

It's a dump valve for use with a loader that uses the quadrant control to raise and lower the lift. Not unduly rare and does nothing in it's current state.

TOH