remotes

[DonBlack-HT]

I'm installing a Terra Mite back hoe on my 2310D and last week while discussing it on here I saw where some one had said that the 2310 had ports to hook up the remotes, Well like always I have forgot where I saw it now I can't find it again. Does anyone know where to find this info I'm needing it to purchase the fittings Thanks

 

[alan-HT]

I'm not aware of any Yanmar with remotes, and would be surprised to see them on an older Japanese-market model And I searched this site by model back to 2008 and didn't find such a posting.

 

[DonBlack-HT]

Thanks Alan When I saw it I was looking at sub frames for backhoes and it was on page 2. Like a knot head I didn't save it. The post was saying there are two ports under the seat and gave sizes of the Asian thread size for the BSP.

 

[winston-HT]

<LINK_TEXT text="http://www.externa...0222-yanmar-2310d-hydraulics.html</LINK_TEXT>

 

[DonBlack-HT]

Thanks Winston I also found the one I was looking for on Tractor Net. Thank-you

 

[DonBlack-HT]

Got the lines hooked up and have used the backhoe. works great. When I remove the backhoe and unplug the hydraulic lines the hydraulic pump squealed (like the oil wasn't circulating I pulled the lever on the front bucket to relieve the pressure and the pump quieted down. My question is. Will I have to hook a return line into my remotes when I'm not using the backhoe now?

 

[winston-HT]

If I am understanding how you are plumbed then yes, you need a loop hose to go from in to out on your remotes to allow the flow to continue.