Replacing Starter Switch TO 20

[Mad Max (TX)]

I am going to replace my starter switch on my TO 20 and was wondering if all that you do is remove the 2 bolts on top and lift out? Never done it before and didn't what any surprises. Thanks for any information.

 

[Richard L]

After you take the two large cables off the studs then you remove the two 7/16" head bolts and lift it out there should be nothing to fall down into the hole.

 

[bobs old iron]

max- if you are replacing with the o.e.m. relay, do as Richard stated,,on my TO-20, i replaced with a car style starter relay, just had to file the end of the ears a little wider to fit, [wasn"t a big deal]...also, i sure you did disconnect the batt first, right?

 

[Michael QLD OZ]

There should be nothing to fall in the hole unless you are ham fisted like me and drop one of the bolts into the hole after you lift the switch off.
But it is an easy part to replace.