ArleninOr

Well-known Member
Need to find steering cylinder rebuild kit for an early 990 with power assist steering. Any suggestions on where to find a kit? TIA
 
I haven't ever come across a kit. What I have fixed was just using O-rings out of the trays at the auto parts store, and random leftovers I had here.

Have you compared the dimensions of the parts to those on the later cylinder? Wouldn't surprise me if they were the same, those kits are available at least, though my cost has more than trippled in the last year.
 
Haven't tried that. It seems that some of the parts might be the same. Will try that. Have a cylinder that worked on one tractor but will not move either direction on another tractor. Any thoughts? Customer would like to get his tractor back in the field but other than changing his to hydrostatic steering I'm out of ideas. Thanks.
 
The kit you need for this cylinder is Case part number K 963448 and nothing in the newer kit is compatible with this cylinder . You might check with you local dealer isd available and if not maybe check with locator. I know a few guys from around my area have got a kit. jc [email protected]
 
You could just put a drag link on to get it going until you sort out the cylinder. IIRC the steering arm needs changed, everything else works.

Maybe try a hydraulic repair shop. They can probably get the seals just based on dimensions.

2 years ago I was told by Case the parts were NLA. Any numbers I have come up "NULL" or "not found".
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top