rotary mower

grizz02

Well-known Member
Question about a 6 ft rotary mower , does it need to be run up to 540 rpm , and what ground speed about 3to4 mph thanks
 
I have a woods brush bull 72 . I run it on my 300 Farmall. I usually cut in 1st gear which is no where near 3 or 4 mph. Probably closer to 2. All depends on what your cutting. Im in 2 or 3 foot tall grass. Your load will obviously depend on what your cutting and the height. And yes I always run mine at full pto speed.
 
It's best to run the engine at or near the 540 pto speed, then you can do a reasonable job with even dull blades. I leave my blades dull because then the stumps from the brush I cut aren't sharp enough to puncture a tire. I run in whatever gear I can cut without lugging the engine down.
 
I let the conditions tell me how to run it. In a pasture the terrain and quality of cut determine ground speed. PTO speed will be at 540. If I'm in a bunch of trees cutting small bushes and grinding up fallen limbs I'll slow everything down.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top