Round-can coil conversion, Part 1

[Bob]

Some years ago I made up a few of these coil wire adapters, and have been meaning to make one up for quite a while and finally got a round tuit yesterday.

<img src = "http://i52.tinypic.com/23ibaf9.jpg">

<img src = "http://i51.tinypic.com/icqlgp.jpg">

<img src = "http://i55.tinypic.com/24xjozr.jpg">

 

[Dell (WA)]

Bob......while close-up photos can be instructive, a story narrative describing the use of the parts in the overall scheme of things would be VERY instructive ......respectfully, Dell

 

[Bob]

Yeah, I'll get to that as soon as I finish the distributor.

 

[JMOR]

(quoted from post at 13:24:39 12/18/10) Bob......while close-up photos can be instructive, a story narrative describing the use of the parts in the overall scheme of things would be VERY instructive ......respectfully, Dell

ell, it looks like it is going to involve the distributor cap &amp; screwing (2).

 

[Jay2NSC]

Cool!!! Thank"s Bob! Jay2NSC