Rusty Block

super99

Well-known Member
I have this block left over from the burned out Oliver 770 gas that I parted out. The under side of the block is pretty rusty. It needs the sleeves and piston drove out and the camshaft removed. Can a machine shop clean it up good enough to reuse?? or just haul it to scrap. Seems like I was told that 770 blocks are somewhat scarce, I hate to scrap it it someone could use it. Chris
cvphoto126972.jpg


cvphoto126974.jpg


cvphoto126975.jpg
 
I'd drop it in a barrel or tank of used oil for a few weeks and all should come apart fairly easy then. Cam would probably soak loose too.
 
If it's all there, as in the main caps, and nothing else damaged (looks like a bent rod), it could easily be cleaned up.

Problem is you don't want to tie money up in something that could sit around indefinitely.

I would finish tearing it down to get a good look at everything, then try to sell it. A little surface rust is not going to hurt anything.

You could mark it down and sell it as is, explain where it came from.

Or ask the going price and guarantee it to be a usable core.
 
Hot tank would clean that up real nice if you can find someone that still does it. Last guy I knew of here gave it up because of the cost to dispose of the solution. He started sending them out but I don't know where.
 
Good morning, all: I agree with showcrop, if you give it to someone, they will be doing the work, and you will not have to make any promises/guarantees.

Dennis M. in W. Tenn.
 
I re-used a rusty Hercules block that was much worse than that one. And the machine shop cleaned it up pretty well. Mine came to me with no head or oil pan and I had let it sit under the edge of an open shed for at least twelve years.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top