Salvage yard liquidation

[fred goodrich]

Got to get working on clearing out the salvage yard. Probably have an auction but have to make some room. Here's a few pic's if you can use anything. Newark Valley NY and we can arrange trucking.

 

[jon f mn]

Dang! To bad your so far away! Either of those little cases have a loose engine and are they 3 bolt starters?

 

[jm.]

Really a shame, I was in your same shape several years ago. Had a 7 acre dozer scrap yard that needed the room . When I bit the bullet I got almost three hundred a ton but scrap is really off now. Folks will kill you for scraping that stuff but look it has been sitting there and not sold so at some point might as well scrap it. Lots of good looking AC engine, and parts but thing is the same parts are all over the country. Get yu two or three good bids and let someone go to work.

 

[oldtanker]

I'm looking for a running Leyland 4-98 diesel engine.

Also for the entire turbo set up off a 1206 Farmall. One of the combine engines used the same turbo piping and manifold but I don't remember which one.

Rick

 

[sjh]

hi Fred

Do you have any INT model 500 dozers. I need some track parts (undercarriage not pads) or the whole track.
Thanks
Scott
585-301-0861

 

[Farmer Rock]

hi,what are the details on that massey ferguson 35,thanks

 

[Ultradog MN]

Hi Fred,
I wish I could find a good steering wheel for a 4200 Ford. Thats the 3 cylinder row crop/platform. model.

 

[fred goodrich]

whole in the block

 

[Bruce from Can.]

That little Farmall with the one arm loader shouldn?t go to scrap. Not to many of those around. Nice little unit for someone to restore and take to tractor shows. Light enough to make for easy hauling behind a pickup.

 

[urbancase]

fred : depending on what you want for the ih 1086 I may be able to do something there.

 

[Mac AR]

(quoted from post at 04:23:36 01/10/20) That little Farmall with the one arm loader shouldn?t go to scrap. Not to many of those around. Nice little unit for someone to restore and take to tractor shows. Light enough to make for easy hauling behind a pickup.

I'll second that! If I was remotely close to NY I'd be coming to get it. There isn't anything remotely similar around here, and it'd look nice all fixed up. And, that little loader would be handy around the farm.

Mac

 

[caterpillar guy]

What is the story on the 1086. I could use a rear half for one.

 

[fordfarming]

picture 13 has in background a ford flat deck up on tire
what model is it and what transmission is it thanks

 

[Fordfarmer]

(quoted from post at 11:51:19 01/11/20) picture 13 has in background a ford flat deck up on tire
what model is it and what transmission is it thanks

What transmission are you looking for? I have a good 5000 SOS with a broken shift cable.

 

[Old Scovy]

Hey Fred ,Your great grand sons are going to say they sure wish old Grand Pa. would have kept all those nice looking old tractors as we could have had a lot of fun playing with them. . Jack