Hi All, My SAME Centauro 65 is in need of some TLC. PTO is weak and Hydraulics are weak. The tractor has a two stage clutch and I believe that the second stage is slipping. So I split the tractor and pulled the clutch. Both friction dics are in tact and still some meat left.
The clutch consists of, fly wheel, primary disc, primary pressure plate, spring set, secondary pressure plate, secondary disc, clutch housing.
On the secondary side (PTO Clutch), the contact on the PP is not even, PP is worn and corroded. Also the fingers on the PP's that move through the housing, allowing the clutch to be engaged and disengaged were some what Siezed. This would explain why the secondary was not engaging. I think.
The thing really needs to go to a shop and get rebuilt, but im afraid what that may cost. As all the parts will have to be refurbished or custom made. I cant seem to find a clutch for this thing.. any where..
Any suggestions Please
The clutch consists of, fly wheel, primary disc, primary pressure plate, spring set, secondary pressure plate, secondary disc, clutch housing.
On the secondary side (PTO Clutch), the contact on the PP is not even, PP is worn and corroded. Also the fingers on the PP's that move through the housing, allowing the clutch to be engaged and disengaged were some what Siezed. This would explain why the secondary was not engaging. I think.
The thing really needs to go to a shop and get rebuilt, but im afraid what that may cost. As all the parts will have to be refurbished or custom made. I cant seem to find a clutch for this thing.. any where..
Any suggestions Please
