SC mower again

Midway

Member
I posted a few days ago about a finish mowers for a Super C with a work saver 3pt attachment. I located a 10 year old or so 6ft woods finish mower in good condition for about the same price as a new King Cutter mower. The woods is a little over 700lbs. Will the SC be able to pick it up? Would the woods be a better buy than the new King Cutter? I also have a MF 135 I would use on the mower I just wanted a mower I could use on both tractors. Both tractors are in good shape. I would appreciate any advice. Thanks.
 
I have used a 7 foot Bush Hog behind my SC,way under powered, but lifting it was not a problem. I also have a 8 foot disc that was a big point for a 300U,I cut the points down to the small FH on the SC. I did have a factory loader on it, so lets add 500# to the front but it pulls it and lifts it with the front on the ground. You will not have any trouble hook it up and start cutting. You will have a better cut if your mower has all 4 castor wheels on it,then you can just put it down and not have to carry it.
 
After owning a Woods for several years and King Kutters for about 27 years, I will take the King Kutter even if the price was higher.
Richard in NW SC
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top