Sears GT 5000 Kohler Engine Trouble

I have been given a Sears GT 5000 with a bad engine. The pistons arn't functioning. No compression, etc. My local mechanic says to trash the engine and find another. If the pistons aren't moving possibly the crank or rods are broken. Are there parts available? A new engine is well over $1K. Can another less expensive engine such as a briggs & Stratton be substitued? Has anyone evey put a small HP engine in? If so , how did it work? Any help is appreciated.

I have been advised not to try to rebuild the engine becuase of the expensive parts and lack of local support. I am told there is no Kohler dealer in Western WA.
 
I have several sears lawn tractors both 21 HP and all the parts are available at sears.com. I completely rebuilt a wrecked one 2 years ago ffrom
Sears Parts Henry go to sears.com and get into the parts dept. Will nee model and Serial number.
 
I went to sears parts with the model number. The engine is no longer available. does anyone know the shaft length? Northern tool say s its 1 18 3.16 what does 3.16 mean?
 
small engine suppliers suggestted 2 B & S as replacements a 44P777-0016 and 44P777-0111 both 1 1/8" dia x 4 5/16 shaft . Whats the difference? both are less than $800
 
Guess I'd check remove a rod cap and see if the piston moves or if the crank is seized up. Might be a piston seized up, ring stuck, etc. or crank bearing seized up or a piece of metal in the bearing. Just keep all the bearing and caps in the order and what they came off of. If the pistons move with the caps off, leave them in the cylinders.

post back with want you see and any pictures will help. Theres enough guys here to walk you through this before you spend a grand.
 
Hey there:
You could try, www.mowergraveyard.com/
I don't know if they can help, but they
show an 18hp Briggs out of a Craftsman
GT18, for just $275,00, Its up to you.
Bob
God Bless
 
you didnt say the engine model #, but really you have to take the engine apart to see if its rebuildable. if you dont know how to do it,get a new engine.
 
thanks I'll retrive the tractor this weekend I'm not much of a mechanic. The guy who was helping says he wont deal with a twin becuase of lack of expereince. I'm now on my own
 
Trash the engine and find another.
Of course by the time you purchase an engine and have it installed on the used chassis. The bill will higher than purchasing a brand new lawn tractor.
 
LOL I estimate that if I buy a B & S for $750 plus the $200 for the tractor and $150 to install = $1050 , that is about $1,000 less than buying a new one ( cheap Sears model )
 
Look it up on Ebay - I saw a couple (new/reconditioned) this morning in the 599 range (Koehlers) that would cover you needs.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top