She lives again!

[Tim, MI]

Thanks to all that helped me out with questions regarding my 9N. My oil presure problem appears to have been solved, I only had it running for a few minutes cause case was leaking from fuel jar. With synthetic oil less that 7 PSI, put in some good "dino" 40W, pressure was at 45 PSI. Replace old 6 volt coil with new 12 and put in a new OEM type resistor (also deal of the day! local tractor repair charged me $4.50! I was stunned even asked if i was correct, she double checked the computer (wich NEVER lies) and that's what I paid! Hope to go back up north this weekend and play some more, just need to get fuel jar gasket.

 

[Dunk]

If "dino" means Quaker State, no way I would run that, as it is paraffin based and has gummed up every engine I have ever seen it run in.

JMO

One more thing about my opinion, it may have been accurate years ago, and not accurate now.

Lots of folks here, that know a lot more than I.

 

[Tim, MI]

By "Dino" I refer to oil compliments of our dead "dino"saurs. At the local auto parts store the only straight 40W they had was a generic store brand and a Penske High performance racing oil at almost $5.00 a quart!!! Store brand was half that.