D Martin

New User
Hi
Does anyone know how to service a

Drew Chem. Ltd.
Duo-Jet siphon gun????

I've added some pic of the gun.

Dale
mvphoto81287.jpg
https://forums.yesterdaystractors.com/photos/mvphoto81288.jpg[/img:1df6e78203]


This post was edited by D Martin on 09/03/2021 at 03:10 pm.
 

Hi Stephen

I don't think it works as good as it should.

The shaft that runs through the nozzle seems worn. It needs o- rings for sure.
I don't know what it's function is.

Also the trigger seems to allow different amounts of air flow in 2 different positions. I have no idea how this gun was designed to operate.

Dale
 
Can't help you.

I don't use siphon guns anymore. I've gone completely to HVLP for everything.
 
The needle that goes through to the nozzle usually has a thick piece of felt instead of an O-Ring. I've never had one wear out. Just remove the needle and clean it and put a little wax on it and it should function alright. You many need to tighten the nut holding the
felt if it's loose. All it's there for is to keep paint from blowing out the back. If you need to replace that part I doubt if it is brand specific.

Usually when a gun doesn't spray right the best fix is to completely disassemble the gun and do a thorough cleaning. Kleen Strip makes a paint sprayer cleaner you might try if the gun hasn't been cleaned in a long time. Follow the instructions and let the parts soak
for as long as possible. You might pick up some sprayer cleaning tools too. Run a brush up the pickup tube. It looks like a bore brush you use to clean the barrel of a gun.

The way the gun functions is pretty simple. It just blows air past the tip of the sprayer and it siphons the paint out of the cup.
cvphoto99901.jpg
 

Hi

I should point out, that this is a solvent/ cleaning gun, not a paint gun.

I'm pretty sure this gun needs repair but can't find any info on it.

Dale
 
I tried to look up what it was and couldn't even find that much. I just assumed it was a paint sprayer. If it uses compressed air it should function just like a paint sprayer. It just doesn't atomize the fluid like a paint sprayer does.
 
Good afternoon: I am using modern view and I see pic of spray nozzle with red marks drawn on the pic.

Dennis M. in W. Tenn.

This post was edited by DMartin9N-2N on 09/04/2021 at 02:24 pm.
 


D Martin, if you were to tell why you think that it doesn't work well someone may be able to help you. What do you see? feel? hear? taste? that doesn't seem right?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top