Sleeve driver or puller 8N

[Tuna IL]

Any body know a good source for a puller or driver to remove the sleeves. Wanted to get one of The Old Hokies but he said that he is not taking orders at this time.

thanks
charlie

 

[JCinKY]

I have a driver to install new 040 (or 090 wall for that matter) sleeves. I use dry ice to shrink them and knock them in with the driver and a ball peen. It can be yours for the price of shipping. I can send some pics upon request.

I have never removed 090 sleeves, only 040. They come out in pieces...

I do not have a puller to remove any sleeves. The only ones I have changes were rusted to the piston and come out with it.

EDIT: I guess it helps to actually read the post

I see you need to remove them. Please excuse my ignorance...

 

[Royse]

JC if you really want to part with that driver I'd
love to have it.

 

[JCinKY]

Royse

I'll email you some pics tonight. Its nothing fancy, couple pieces of laser cut plate.

I've put in about 5-6 sleeves with it, bit I'll let you decide.

 

[Tuna IL]

(quoted from post at 17:44:44 05/27/14) Royse

I'll email you some pics tonight. Its nothing fancy, couple pieces of laser cut plate.

I've put in about 5-6 sleeves with it, bit I'll let you decide.

Well if Royce passes let me know, I'm very interested.

Thanks

 

[JCinKY]

(quoted from post at 21:38:35 05/28/14)

Well if Royce passes let me know, I'm very interested.

Thanks

I am actually going to box it up and send it to Royse tomorrow.

Shipping is around $16 from KY to MI.

I could build you one and ship it for less than $30, depending on the distance, if you really want. I see you're in IL.

Although, it is only for installation. Lathe is down and I can't get one accurate enough to drive them out.

Email should be open.

 

[Tuna IL]

Send me an email please, I want one.

thanks
charlie

 

[JCinKY]

Charlie,

Email sent.

Jeff