sleeve removal

[n8terry]

Any suggestions of how to remove sleeves from an early 8N? Manual says use a crushing tool, don't have a clue what that is.

Can a tool be made to pull sleeves?

this is for a friend that has a lot of machine shop equipment, so he has ability to make a tool that may work.

Any other suggestions will be appreciated.

 

[W R]

Are they wet or dry sleeves.

 

[TheOldHokie]

(reply to post at 21:51:58 04/12/08) Any suggestions of how to remove sleeves from an early 8N? Manual says use a crushing tool, don't have a clue what that is.

Can a tool be made to pull sleeves?

I make and sell the sleeve tools shown below. I have them for the 8N, NAA, and 600/800 series motors. Here's a link my web page.

TOH's Sleeve Tools

One of the links at the botom is a slide show of how they work.

[email protected]

 

[TheOldHokie]

There are also links to the shop drawings for those tool at the bottom of the web page. Everything your friend needs to know to fabricate something similar for you.

TOH

 

[JohnMD]

Dry sleeves.