I picked up at different times 2 Reese 7' snow plows for 4x4 p/u's
both have power angle and came with the power units that I got for 500 ea
Also picked up just a 6' blade for 100 with manual tilt
mounting one to a tractor isn't very hard and works well
at 1500 I'ld say he's way over priced
 
A year ago I bought an 8 foot Meyer hydraulic angle plow for $50.00. Mounted it to my loader frame and it works well, although for now I removed the angle cylinders and angle it manually.
 
I bought a new 7 ft blade from Rural King on sale close to $300. I wasn't going to pay big bucks for a worn out used one.
 
I know a guy that has a Dearborn plow like that...told me he would sell it for $500. I only saw pictures but, it looks to be in good shape and complete. If your anywhere near west central Indiana I can get in touch with him for you.

Dan
 
Yeah, snow plow, I've heard of them. We don't get much of that white crap here, BUT, I have a 7' (homemade) rear plow for my JD 60, chains too. The only time we had enough of that apcray, the danged tractor was apart in the shop and I had to beat the behaysoos out of my Mazda B4000 with chains to get up and down the drive way (55M rise) - had to get the bride to her nursey job - left her car at the btm. and thankfully the hwy's guys didn't plow us in.
 
Those plows were made for the FORD tractors , if weights snd chains are used it will handle that front plow very nice. However $1500 is very high in my opinion. joe
 
A 3 point mounted blade that will lift high works much better than trying to push some thing like that around. That will not lift very high and the three point blade can be lifted above some or a lot of snow depending how you set it up and puts weight on the drivers
 
That's way too much money and probably too much blade. Looks like an old truck blade to me. You need extra weight on the rear with a front blade. I've used both and a front blade is way better.
 
I sold a better one than that for $350 last week. He is way overpriced. My guess is he's throwing a number at the wall to see if he can get someone to bite. Can't understand why 13 people are watching it cause it ain't going to sell at that price.

Kirk
 
Unless that person is coming to upstate New York sometime soon, I think it's fair to say I am not interested. The shipping cost would be more than the plow. Thanks anyway.
 
They wern't made for 9n tractors. A 9n is a toy at best.No live hydraulics,bad brakes.The first time you get off the drive you'll be stuck.Maybe on an 860 in a light snow.An 8n or 9n will get stuck driving through drifts even without a blade.
 
One of the pulleys is broke but I will include another pulley to replace it. Have the brackets,although one is homemade. Cables are on but not in the greatest of shape. You can email me at [email protected] if you have an interest or questions.

Kirk
 
"An 8n or 9n will get stuck driving through drifts even without a blade."

That's one reason front blades are better than back blades.
You don't drive through drifts. You plow them out of the way.
Assuming the operator has a clue as to what they're doing.

I've used a 2N with a front blade to plow snow in Michigan
for years. I can tell you for a fact that they work just fine.
I have never gotten mine stuck and I plow 600 feet of gravel
driveway wide enough to pile all winter's snow out of the way.
 
On that tractor it is a 19-80 dearborn system made for a later NAA and up models. Not a bolt on and go system for the N tractor. You could make a bracket for it and use it on the N tractor as seen here on one
of my 8n's. The thing that is nice about the 19-80 frame is that it is able to raise higher the that standard ones made for the n tractor which is better for mounding up and pushing back snow piles.

Kirk
100_3244_zps946c1ba3.jpg
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top