SoS Shifter

[64frd4000ind]

I am in need of two of the clips that hold the nuts in the sheet metal to screw the SOS shifter back on.

For years mine just had 2 screws holding it on, now that I'm doing the work to get it painted and put back together, thought it should have all 4....

I haven't seen them anywhere, does anyone know where to get them and/or have 2 laying around?

 

[forddoc]

Got them on the shelf at work shoot me an email

 

[64frd4000ind]

Dont' see your email?

mine is [email protected]

 

[64frd4000ind]

Doc I would be interested in 2 of those clips with the screws and a screw that holds the side cap on the shifter if you have them.

Please email me and let me know, getting to the point where I need to start putting some of this back together.

Here is where I have to keep my patience hehe, I am excited that things are going together instead of coming apart, I can see the finished product looking better.

I have officially ran my local store out of ford blue though, gotta wait on some more of that to finish the project.

 

[Jeff IA]

I used some that are for rack mounting computer and network equipment. If you have a friend that works in IT, he probably has a drawer full of them.

 

[Larry NCKS]

(quoted from post at 19:49:20 02/13/15) I am in need of two of the clips that hold the nuts in the sheet metal to screw the SOS shifter back on.

For years mine just had 2 screws holding it on, now that I'm doing the work to get it painted and put back together, thought it should have all 4....

I haven't seen them anywhere, does anyone know where to get them and/or have 2 laying around?

I haven't checked, but am thinking Dennis Carpenter should have these.

 

[64frd4000ind]

Forddoc had some on the shelf, and I bought them from him, got them painted and my shifter installed.

A Big THANK YOU again to doc.