Spark plug gap

Carter W

Member
1948 8n 6v front mount distributor.
Just installed new Autolite 437 plugs and gapped them at the called for .25. Tractor runs very rough. I opened up to .30 and it runs somewhat better. At .35 it runs fine. What"s this telling me? Should I be using a different plug.
I realize if it runs well at .35 let"s move on but I"m curious.
 

You have a issue if you have to open the gap up... if not then why do the rest of us run OEM gap with no issues... I am not a believer in opening the gap to cover up a issue are to improve performance unless its a modification and the engineer that designed the mod says so....
 
i agree with the others. gapping the plugs that wide is allowing more KV to build up when jumping.. that means soemthing..

also, as the others are telling you.

.025 on the plugs.. not .25 or .30 or .35

.015 on the points.. not .15

not nitpicking.. makes a huge difference..

soundguy
 
(quoted from post at 19:01:29 05/26/11) i agree with the others. gapping the plugs that wide is allowing more KV to build up when jumping.. that means soemthing..

also, as the others are telling you.

.025 on the plugs.. not .25 or .30 or .35

.015 on the points.. not .15

not nitpicking.. makes a huge difference..

soundguy

A loose .015 at that are if picky a tight .016... no need to go down hill off the get go let it come to ya..,.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top