special bolt #516259M2

[EdM]

Hello. I'm working on a 175 and on page 313, reference #18 of the AGCO parts book it calls for a "special" bolt. The ones that I took out were regular bolts with the heads ground down from a previous repair, so I'm assuming that's what is different about them but the heads are pretty shallow and would like to know the specs on these bolts so I can make new ones as I can't seem to find new ones for sale. Also on this auxiliary hydraulic pump there is a screen on the suction, same parts page reference #3, part #886745M92 that I can't seem to find. Anyone know where I can get a new one? Thank you.

 

[Jim.ME]

Where have you checked to find the your parts? Did you try a Massey Ferguson, or AGCO dealer?

 

[hymie2lt]

Both should still be available from Massey...however the filter is quite pricey.
Wayne

 

[acadam20]

That filter is stupid expensive (if I recall correctly it was almost $300). Just give the one you have a good cleaning.

 

[beige35]

EDM Go to Parts Depot thay have like 33 # 516259m2 the bolts in stock and list of dealers you buy from most Agco use them the parts are NOS

 

[EdM]

Haha. Stupid expensive, ($246.84) is a gross understatement. Even my AGCO dealer says that cannot be correct. He's going to check on it. I've found incorrect pricing with Deere and Ford in the past. We shall see. Unfortunately mine....because of the last owner, might not be usable. I might have to go to a standpipe that was used in other applications. I'll have to rely on the filter on the front of the tractor for the oil cooler. That should help. Like I said....we shall see.