Started corn harvest

jon f mn

Well-known Member
Got started on my corn last weekend. My new combine seems to be working good. I did have some trouble getting the settings right for the cylinder as it has a real aggressive set of bars on it. That made for some difficulty getting it just right. But eventually I got it and it works good now.


cvphoto103405.jpg


cvphoto103406.jpg


Two loads just fills the dryer.


cvphoto103407.jpg


Corn is a bit on the wet side yet, maybe 25% or so. Plus a bearing went it on the corn head so I'll need to fix that. But I'll may wait some for it to dry more anyway.
 
I assume you can adjust cylinder speed from the seat, but not concave clearance?

I'm not looking forward to buying propane this fall. The weather is going to have to change if the crops are going to dry down any more. We've had close to 2 inches of rain over the last couple of days, and some very thick fog.
 
The concave is adjustable from the cab but cylinder speed is not on this machine. The problem was I thought with the aggressive bars I would need the concave more open, but it needs to be more closed to get it right. After several adjustments the wrong way I figured it out and got it right.
 
Sure looks good for the old case. We are shelling 12% or so no drying. Record corn crop in Tennessee this year plenty of late rain.
 
I don't know the brand, but they are maybe 50% taller and the angle bars are thicker and and deeper than standard bars. They are supposed to be better in small grains. For oats I had the concave much more open than normal and they worked good. We will see how they work on corn.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top