Steering wobble

firsttime

Member
I have a 1973 4000 (gas w/power steering) with a wicked steering wobble at high speed. Everything is tight. It moves from the steering arm at the steering box. I can't find a good diagram of the parts breakdown with part numbers. My diagrams are also not detailed enough to allow directions for assembly. I don't know what I need and what parts are available. My Ford service manual doesn't help and neither does my dealer. Any help would be appreciated.
 
This is where I'm not certain. It moves at least some, I think. At worst it translates to the steering wheel, at one point almost tearing it loose from my grip.
In any case when it starts to wobble I can feel it in the steering wheel.
 
(quoted from post at 15:32:40 02/18/22) I have a 1973 4000 (gas w/power steering) with a wicked steering wobble at high speed. Everything is tight. It moves from the steering arm at the steering box. I can't find a good diagram of the parts breakdown with part numbers. My diagrams are also not detailed enough to allow directions for assembly. I don't know what I need and what parts are available. My Ford service manual doesn't help and neither does my dealer. Any help would be appreciated.


Tractor tires are not often balanced. Have you jacked the front up and check for looseness at all points?
 
Toe-in first, and slack in the ball-joints/gear box next, will be the culprit. Your not getting close enough to 65 mph to worry about balance. Could also have spindle bushings gone as well.
 
I'll second that. If your steering system is loose, maybe more than spec.....toe it in till it stops. Other thing is the torque on the steering box itself. The screws on the side with the exposed lock nuts. On one I had I ran them down finger tight snug and with the toe in had no more problems. I don't see the balance condition of the tires effecting shimmy, but I never explored the problem/solution.
 
YMMV,
I had wobble in my steering on a 4600 which was new to me.
I thought it was the bushings and went thru and replaced them and the thrust bearings.
Put it back in service and very little had changed.
I was getting some flat tires from clearing an area and decided to put new tires on the front.
The wobble is now gone.
My problem must have been worn tires.
Keith
 
I have had that problem on several Fords, including my '51 8N which I have been driving for 69 years. Until I fixed the 8N, I would put my right foot up on the steering link ball and press it to stop the wobble/shake. As a kid showing off, I would go down the road in high gear with both feet up on the steering links and my hands on the fenders.
 
If you had something like slicks or pickup take offs and replaced with new 3 Ribs and had sufficient toe-in I can see it potentially curing your problem.
 
(quoted from post at 15:32:40 02/18/22) I have a 1973 4000 (gas w/power steering) with a wicked steering wobble at high speed. Everything is tight. It moves from the steering arm at the steering box. I can't find a good diagram of the parts breakdown with part numbers. My diagrams are also not detailed enough to allow directions for assembly. I don't know what I need and what parts are available. My Ford service manual doesn't help and neither does my dealer. Any help would be appreciated.

[i:48fca067f5]If you had something like slicks or pickup take offs and replaced with new 3 Ribs and had sufficient toe-in I can see it potentially curing your problem.[/i:48fca067f5]

I don't want to start an argument but I will relate a similar problem. I have a 68 4000 with P/S. It wobbles as you describe. For 20+ years it had 3 rib tires on the front. Everything was tight, spindles, rod ends, ect. I rebuilt the P/S cylinder as best I knew how back then and adjusted the steering gear properly, but she wobbled nonetheless. I lived with it until last year when one of the 3 ribs rotted and I replaced them with 5 ribs. No more wobble. All these years I blamed the steering assist valve for causing the rapid corrections. Personally, I think that cylinder is a POS. When it wears out, it's finished, and there's no replacement. The old girl handles 10x better now and I might reconsider my plans (that I never get around to) to replace the steering assist with a steering ram and motor. Just another perspective to think about when you're deciding how to proceed.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top