Stuck spindle

[Scott Eakers]

I am working on a 204 Industrial I have a spindle on the left wheel that is frozen. I have moved it some and it's soaking in penetrating oil. I am going to have to improvise some type of press to push it out, anybody got any suggestions? I was thinking maybe a chain and a small bottle jack.

 

[Jeff Z.]

I don"t know what they are made of for that tractor.
If they are the steel bushings run a bead from a welder down it. It will shrink and distort and will come out pretty easy.

 

[Jeff Z.]

Sorry, I read it wrong. Thought you had a stuck bushinng.

 

[Jg20601]

I am guessing you have a hub that is frozen on a spindle. I would use the penetrating oil and see if I could get it to turn using a prybar to spin it. After you get it turning you should be able to workk it off.

Other ideas could be tapping it with a large hammer on the outside and using a puller of some type. Last would be to heat it as that could lead to oher problems.