Super C Clutch

[keeter84]

I?m searching for clutch kits. My local guy I deal with is right in line with Steiner and other parts houses which is $250-300. I found (link provided) a kit from yesterday?s tractors for $140. Does anyone have any expierence with this product or the reason why it?s $110-160 cheaper?

http://www.yesterdaystractors.com/375493K_Clutch-Assembly_4043.htm?gclid=EAIaIQobChMIrLyOhpOs2wIVjCSGCh2ROwbyEAQYBCABEgKpj_D_BwE

 

[old]

We used a clutch kit from Y-T on a Ford 8N last winter and it worked just fine. So if I where you I would be likely to go with Y-T on this one

 

[AlinMO]

And you better order quick before the price is changed.

 

[Oldiron29]

Looked last week for C clutch and YT had small finger clutch cheep. But original clutch had wide fingers, that was like $150 more. so watch what you buy on clutch's cheep ant so good when you have to split a tractor to replace it!

 

[keeter84]

That?s what I worry about. I like dealing with local folks, but like the chance to save $150. However paying the extra money I can ensure I?m getting what I need.

 

[keeter84]

I see that two are listed on YT. One is a spring disk another is a solid disk. Looking through the inspection hole on the torque tube I can see that it is the narrow finger, how do I tell if it is a solid disk or spring disk?

 

[Oldiron29]

I have bought from YT and got good quality parts. You just have to look before you buy and know what you are buying. There are so many cheep parts around I think YT get two chose's listed to give guys a cost effective way to do repairs.

 

[DR. EVIL]

I'm pretty sure the '51 M still has the factory clutch, and I KNOW the '54 Super H does. 67 and 64 years, M was loader tractor almost all 67 years, Super H has been loader tractor last 23 years.

Are you sure the Super C really needs a clutch?

 

[keeter84]

Through the service hole in the bottom I can see that one of the pressure plate fingers is not in place. I can tighten the adjustment bolt but it never gets tight as if the hole is stripped. The as it sits the the clutch pedal won?t disengage the clutch. I had posted another thread about the problem as it occurred suddenly while using the tractor. Push the clutch and the tractor keeps going.

 

[Janicholson]

In today's connected world, YT is "local" in the sense that we are all here at the forum by the graces of our YT hosts. Giving them our business is best practice. Jim

 

[keeter84]

Fine point sir.