Super C headlight switch

[1952SuperC]

I have a 52 super C that has been 12v converted. What do I need for a headlight switch. I looked one up at work and all I see on Case website is the 6v one. Looking online I see 3 and 4 position. I thought I knew what I needed but now I'm confused.

 

[504]

A simple pull push off with a 12v rating is fine. My 1953 only had two headlights from the factory. Even an extra work light on the rear still wouldn’t be much load for a single switch.

 

[1952SuperC]

A simple pull push off with a 12v rating is fine. My 1953 only had two headlights from the factory. Even an extra work light on the rear still wouldn’t be much load for a single switch.

I was almost thinking of taking the rotary switch i have on one of my old cub cadets so it looks factoryish. The cud cadet is a frankenstein tractor anyways.

 

[CharlesTx]

I have a 52 super C that has been 12v converted. What do I need for a headlight switch. I looked one up at work and all I see on Case website is the 6v one. Looking online I see 3 and 4 position. I thought I knew what I needed but now I'm confused.

My converted 300 still has the original 6 volt switch. Has worked just fine for many years.

 

[Powered By IH]

6v one should work fine.

 

[1952SuperC]

6v one should work fine.

OK. The one that is in it isn't working so I wanted to get a new one.

 

[DaveBN]

You can buy new ones. Three position is what you need. We can help with wiring if needed
Dave

 

[AlinMO]

A 6 volt switch has to handle twice the amps as a 12V switch. So a 6V switch will easily handle 12V.for same application.