Super C pto seal

[thumbanger]

What is the best way to change pto seal. Thanks in advance

 

[Harold Hubbard]

Get a dent puller and screw it into one side of the seal, pop it out and tap in a new one. If you don't have a dent puller, fiddle around with a screwdriver or punch, and destroy the old seal, bend it up enough that you can get hold of it with pliers and pull it out.

 

[juniur]

drill a hole in the seal and screw a sheet metal screw into the seal and pull it out with claw hammer.

 

[GA Dave]

I pulled all this out of my IH 240 Utility with a HF seal puller. Replaced with one thin seal and working fine. David................

 

[thumbanger]

Thanks all will let you know what happens.

 

[Cub149]

As you can see from GA Dave's photo, a sheet metal screw wouldn't be able to pull that out. Believe me, I've tried.