Super C wide front bumper stops

[MarkinMo1]

Could someone give me the dimensions for the 2 steel wide front stops that go on a C or super C that keep the wide front from over pivoting? I cant find any for sale so I would like to fabricate my own.Thank you

 

[caterpillar guy]

The bars are about 2-2 1/2 inches I would say and about 3/8-12 thick. Been a long time since I looked at a C.

 

[riverbend]

2 wide X 12 1/4 long X 5/8 thick
It is hard to get good measurements with the cultivator on.

Let me know what you would want to make a second set. One of my SCs needs them.

 

[MarkinMo1]

I will I'll see how the first set goes.

 

[BarnyardEngineering]

I made a set out of regular steel. They bent.

Most likely the factory ones are made from spring steel.

 

[MarkinMo1]

Thank you

 

[ihplowboy]

5/8 x 2 x 12-1/8 long bar
3/4 x 2 bar would be stronger
17/32 holes
1/2 inches from end and 2 inches apart
Jim

 

[ihplowboy]

Where are you.
I am in Innerkip Ont.
Jim