I don't know the 'compression ratio'is.But my Super M with 4 1/8 fire crater pis
tons and 'shaved'head still puts out about 60 hp on regular gas.Overhauled in '82,it still does regular farm work.He doesn't work as hard as he used to as I now have newer and bigger(706,1256).Has wide front,Saginaw twpe 3 point,MW lpto hand clutch,etc.Still have his 10 ft equipment and 2x16 rollover plow just in case.They will have to bury me with him as he will never leave
 
That is a difficult question to answer with a number. After putting in fire crater pistons in one of my H's I will say it was a lot healthier. I would expect to get one point higher compression with them. Its enough to notice a difference but still run pump gas. If you really want to bump the compression you can have custom piston cut to what ever compression you want. I have done that that for two of my pullers, fun until you have to buy 110 octane race gas.


OTJ
 
When I OHed the Super they sent stephead pistons.I was told they were the same as genuine IH Firecraters.There are 5000 and 8000 ft altitude pistols out there.They are basicly a domed flat top.I once had an F12 with 8000 ft pstons.My F20 has 5000 ft pistols from the factory.We are at 5000 ft,the F12 came from 8000 ft.
 
I thought the same thing years ago,tried it figure it out,think it was a tad less thee 7.0 ! I do have 145 lbs of compression !
 
M&W listed the compression ratio for a SM with their two raised places on pistons as 6.4 with a 8060 or 8574 gas head, same pistons with a 400 or 450 gas head 6.8. Standard elevation piston. Don't think a standard elevation fire crater would make any more and maybe a little less. IH used to make some step head high elevation pistons that would make more compression than the fire craters. Used to make some high elevation fire craters also. Lots of different piston top types around so no clear cut answer. LP gas on a 400 or 450 with flat tops was 8.5 with a small combustion chamber head except the early 400 LP that used the gasoline head with a raised piston that made 8.76.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top