Sv, pic for you

JayinNY

Well-known Member
Place around the corner from me does custom
tillage, planting and corn silage harvesting,, saw
one of the 2 jd 8840 tractors by the road, and one of
the jd choppers in the back ground. 3 miles from
here was a jd 8830, i dont know if if belongs to
these guys though..
cvphoto64040.png


cvphoto64041.png
 
(quoted from post at 06:10:03 11/23/20) That looks like a 8440 to me,one of the poorest starting tractors, JD ever made !

Evidently you never had the displeasure of attempting to start a JD 2840 when hyd's are at operating temp or 2010D!

Only articulated JD tractor I ever sold new while employed at JD dealership was 8440's. These three 8440's started fine with no problems. Those tractors had 6076(466 cid) similar to my JD 4255 which has started easily since I purchased it in '93

I wonder why the 8440's in your area were difficult to start? The 8440 had hyd aneroid on inj pump not that tricky mechanical amberoid linkage similar to 4430.
 
I know i cant figure it out, i had a 8430, it was awesome starter,best friend had a 8440, and others had em,they wouldnt start, they had to plug em in during the day to get them to start after dinner! My 8430 had that steel line going to the aneroid valve break right at the bend, when u would shut it off,[no air pressure] it would fall into place, and wouldn't see it,but on the dyno it was all over for hp, but the mechanic Tony caught it !
 
I have to disagree with you. Ever had a 4230? I did and it would not start today if the weatherman forecast colder weather for next week.
 
I dont know what they all tried, my friend put new sleeves and liners, a complete overhaul trying to get it to start, no joy,all he did was spend money !!!
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top