Tagging sheep

Bkpigs

Member
Anyone else tag their sheep "backwards"? I put the male end through the front of the ear and the female side on the back of the ear. The reason for this is it is easy to make sure the pin doesn't go through the vein or tendon. The end of the male tip is enclosed in the female end and no real places for anything to catch, just has the "nub" molded in the female end to accept the male tip.

Just curious if I am the only fool who does it this way or not. THe Scrapie number is only on the female end and I have yet to be able to read a tag on the front side of the ear. Therefore, I get the male side blank.
 
(quoted from post at 21:28:18 04/01/21) Anyone else tag their sheep "backwards"? I put the male end through the front of the ear and the female side on the back of the ear. The reason for this is it is easy to make sure the pin doesn't go through the vein or tendon. The end of the male tip is enclosed in the female end and no real places for anything to catch, just has the "nub" molded in the female end to accept the male tip.

Just curious if I am the only fool who does it this way or not. THe Scrapie number is only on the female end and I have yet to be able to read a tag on the front side of the ear. Therefore, I get the male side blank.

I've done it both ways. I prefer to see the point so I can do as you say and not hit a vein. My scrapie tags are printed on both sides, probably depends on where you get them.
 
tagged sheep for years and never think to much about it. always male from the outside in.
Never had an issue with hitting anything bad yet.
I don't tag till they leave here and then I just snap the id tag in as fast as I can and
don't care which way they go.
for my ewes they get tagged as they lamb for the first time. they get a larger tag with
number and button on the back, tag in the ear.
 
I have done it backwards by accident a few times but I usually do it as the instruction says just because I don't want to give the inspectors any excuse for picking on me.
But I agree with you, it is easier to put the pin inside the ear so you can almost feel where it is best to punch it through.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top