TD6 winch removal

[vapet]

Trying to remove Cargo winch. Have the 8 -3/4" and the 2- 5/8" bolts out that hold the adapter to crawler. Will not come loose. Am I missing something?

 

[DGH]

On my Oliver with a Carco winch there is a circle of 1/2 inch bolts around the input shaft as well.

 

[Coffeecreek]

Long stud and short stud at top on both sides , two short studs at bottem inside drawbar arms on both sides ( have fun getting them ) Make sure it"s well supported it ain"t light . Thats the way it was on my 62 series think the older one"s are the same .

 

[vapet]

Ended up taking the winch off the adapter. Two bolts holding the adapter at the pto opening that were hid by winch. I"m tired! Thanks for your responses.