TEA 20 Steering Bearing

[Don Mac]

The TEA 20 gift tractor is running well now, so long as it has fresh fuel in it.
The bearing at the top of the steering tube is shot. So I am looking at dismantling the steering box, removing any pieces of the bearing out of the steering box and then re-building it.
I did a Nuffield Universal three a few years ago and managed to purchase an off the shelf bearing that fitted the top perfectly.
Anyone know the equivalent bearing, make and number for the top of the steering column?
Any other jobs I should do when I dismantle the steering?
Appreciate any help I can get.

 

[John (UK)]

bearing TC4 B6..you would be better going to one of the dealers that specialise in these tractors as you will need more than the bearing when you look at [email protected]

 

[Don Mac]

Many thanks John.
you are right it looks like more work than I had to do on the Nuffeild.
Don

 

[Bill Brox]

Hi,

Timken bearing.

5BC Bearing

4CB inner cone id = .8125 (20,638)

6 Bearing Cup Od = 1.750 (44,450)

Witdh of assembled bearing
T = .5605 (14,236)


Bill

 

[Bob (Aust)]

Timken bearing.

5BC Bearing

4CB inner

That is the bearings I bought some years ago in Australia. They "stung" me $75 for top and bottom bearing sets on the excuse they were imperial sizes, limited production.

Would be interested to know the cost in the USA?