Testing oil cooler

SVcummins

Well-known Member
How can i test my hydraulic oil cooler for leaks?
cvphoto60213.jpg


cvphoto60214.jpg
 
Try plugging one side and put a little compressed air to it best you can on other side, listen for air leak, or just submerge it in water and watch for air bubbles maybe?
 
Take it to your local radiator shop; or possibly have someone hold it under water while you supple air pressure to the inlet and hold your thumb over the exit...gentle....if you had a way to put 10lbs of air pressure on it. So you think it is leaking ?
 
Something is leaking right there and it opens and closes up because sometimes it leaks sometimes it doesn’t , there are no radiator shops locally
 
SV - I've had good luck using a bicycle innertube to pressurize radiators at a safe pressure. You can cut the tube, hose clamp it to your inlet/outlets, and air it up until it's as big as your arm, then use windex to check for leaks. No danger of wrecking anything.
 
I use an air pressure regulator to test radiators.

Start out with it backed all the way off, rig up a hose connection, start turning the regulator up to a reasonable pressure.

Sometimes leaks are temperature related. If nothing shows submerged in water, find a way to heat the water up.
 
It doesn't look dirty enough to be leaking real badly :). Sure it isn't just the hose connection? My local radiator guy has fixed a couple for me... he's been successful, but claims they are difficult for him to fix vs a radiator. I know you like doing things yourself, but I'd take it somewhere good and have them fix it.
 
Steve has the plan! I used a pot that we deep fry turkeys in and the propane burner to test mine.
 
Should be able to put a fiar amount of pressure on it since it has about a 100 PSI on them running. Will probably need to heat the water you put it into. I used the torch under the pan /tub it was in on my engine oil cooler.
 
They are pretty easy tp check. Ya need a tank that you can submerge it in water a mickey mouse hook up to and air supply with a reg and block off one port and apply around 20 PSI while you have it swimming . You will find the leak . Now if it iws on the outside ya may be able to fix it , if it is deep then all bets are off.
 
Im thinking it may be leaking right out the bottom I don’t know. The hoses look fine but i will replace them all while I’m here
 
Well it turns out the local hold em and screw em does radiator service . I am so busy at work i don’t have time to really work on it i would have but since they can do it i dropped it off and hopefully they can find or not find a leak . Thanks for all the replies i took the easy way out this time
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top