Thermostart threads

[David G]

Can you tell me what the Thermostart threads are?

Thanks

 

[Destroked 450]

1/8" pipe thread

 

[Bern]

7/8 - 14 according to the parts book.

 

[Dieseltech]

There are two thread types available, Bern is correct on most common size, have to look at the service listing for the other. They can be 12 or 24 volt, low, medium, and high flow rates.

 

[Destroked 450]

(quoted from post at 22:14:32 11/29/16)
1/8" pipe thread

Brain gas, had just read a post about the temp sender.

 

[Bern]

I don't think Ford used anything other than the 7/8" size.

 

[Dieseltech]

You are right, that's the most common size. Spec sheet does show a 1/2 BSP thread size too, but I've never seen one. Both in 12 and 24 volt.